June 2016 Most Viewed Documents for Materials

  1. The influence of grain size on the mechanical properties ofsteel
    Morris Jr., J.W. (2001)

    1024

  2. Fatigue design curves for 6061-T6 aluminum
    Yahr, G.T. (1993)

    856

  3. Heat Treatment Procedure Qualification -- Final Technical Report
    Robert C. Voigt (2004)

    846

  4. Charpy impact test results on five materials and NIST verification specimens using instrumented 2-mm and 8-mm strikers
    Nanstad, R.K.; Sokolov, M.A. (1995)

    615

  5. Mechanical properties and energy absorption characteristics of a polyurethane foam
    Goods, S.H.; Neuschwanger, C.L.; Henderson, C.; Skala, D.M. (1997)

    564

  6. Results of charpy V-notch impact testing of structural steel specimens irradiated at {approximately}30{degrees}C to 1 x 10{sup 16} neutrons/cm{sup 2} in a commercial reactor cavity
    Iskander, S.K.; Stoller, R.E. (1997)

    455

  7. Ferrite Measurement in Austenitic and Duplex Stainless Steel Castings - Literature Review
    Lundin, C.D.; Zhou, G.; Ruprecht, W. (1999)

    358

  8. A study of polyether-polyol- and polyester-polyol-based rigid urethane foam systems
    Madden, J.P.; Baker, G.K.; Smith, C.H. (1971)

    273

  9. Comparison of three Ni-Hard I alloys
    Dogan, Omer N.; Hawk, Jeffrey A.; Rice, J. (Texaloy Foundry Co., Inc., Floresville, Texas) (2004)

    250

  10. Enhancing thermal conductivity of fluids with nanoparticles
    Choi, S.U.S.; Eastman, J.A. (1995)

    218

  11. PROPERTIES AND PERFORMANCE OF CEMENT-BASED GROUTS FOR GEOTHERMAL HEAT PUMP APPLICATIONS.
    ALLAN,M.L. (1999)

    184

  12. Verification of Allowable Stresses In ASME Section III Subsection NH For Grade 91 Steel & Alloy 800H
    R. W. Swindeman; M. J. Swindeman; B. W. Roberts; B. E. Thurgood; D. L. Marriott (2007)

    183

  13. Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review
    Doebling, S.W.; Farrar, C.R.; Prime, M.B.; Shevitz, D.W. (1996)

    163

  14. Work Functions of the transition Metals and Metal Silicides
    Drummond, T.J. (1999)

    161

  15. Ferrite Measurement in Austenitic and Duplex Stainless Steel Castings - Final Report
    Lundin, C.D.; Zhou, G.; Ruprecht, W. (1999)

    140

  16. Metals design handbook
    Betts, W.S. (1988)

    127

  17. Low-cycle-fatigue behavior of copper materials and their use in synchrotron beamline components
    Wang, Z.; Nian, T.; Ryding, D.; Kuzay, T.M. (1993)

    124

  18. Surface recombination in semiconductors
    Langer, J.M. [Polish Academy of Sciences, Warsaw (Poland). Inst. of Physics]; Walukiewicz, W. [Lawrence Berkeley Lab., CA (United States)] (1995)

    123

  19. Sensitization, intergranular attack, stress corrosion cracking, and irradiation effects on the corrosion of iron--chromium--nickel alloys
    Wu, P.C.S. (1978)

    122

  20. Graphite design handbook
    Ho, F.H. (1988)

    120

Last updated on Thursday 07 July 2016