June 2016 Most Viewed Documents for Renewable Energy Sources
- Aerodynamic characteristics of seven symmetrical airfoil sections through 180-degree angle of attack for use in aerodynamic analysis of vertical axis wind turbines
Sheldahl, R E; Klimas, P C (1981)324
- Temperature coefficients for PV modules and arrays: Measurement methods, difficulties, and results
King, D.L.; Kratochvil, J.A.; Boyson, W.E. (1997)253
- Wind energy applications guide
anon. (2001)251
- Calculation of brine properties. [Above 80/sup 0/F and for salt content between 5 and 25%]
Dittman, G.L. (1977)240
- Solubility of methane in water under natural conditions: a laboratory study. Final report, April 1, 1978-June 30, 1982
Blount, C.W.; Price, L.C. (1982)201
- PROPERTIES AND PERFORMANCE OF CEMENT-BASED GROUTS FOR GEOTHERMAL HEAT PUMP APPLICATIONS.
ALLAN,M.L. (1999)184
- Thermal conductivity of aqueous NaCl solutions from 20°C to 330°C
Ozbek, H; Phillips, S L (1979)183
- Viscosity of NaCl and other solutions up to 350{sup 0}C and 50 MPa pressures
Phillips, S.L.; Ozbek, H.; Igbene, A.; Litton, G. (1980)183
- Bamboo: An Overlooked Biomass Resource?
Scurlock, J.M.O. (2000)166
- Dark current-voltage measurements on photovoltaic modules as a diagnostic or manufacturing tool
King, D.L.; Hansen, B.R.; Quintana, M.A.; Kratochvil, J.A. (1997)148
- FEASIBILITY STUDY FOR A PETROLEUM REFINERY FOR THE JICARILLA APACHE TRIBE
John D. Jones (2004)140
- Water-lithium bromide double-effect absorption cooling analysis
Vliet, G.C.; Lawson, M.B.; Lithgow, R.A. (1980)128
- Autothermal Reforming of Natural Gas to Synthesis Gas
Steven F. Rice; David P. Mann (2007)113
- Seventh Edition Fuel Cell Handbook
NETL (2004)110
- Stress-corrosion cracking of steels in ammonia with consideration given to OTEC design: a survey
Teel, R.B. (1980)106
- Development of the helical reaction hydraulic turbine. Final technical report, July 1, 1996--June 30, 1998
Gorlov, A. (1998)96
- A Review of Methods for the Manufacture of Residential Roofing Materials
Akbari, Hashem; Levinson, Ronnen; Berdahl, Paul (2003)87
- Wet cooling towers: rule-of-thumb design and simulation
Leeper, S.A. (1981)84
- Fuel Cell Handbook, Fourth Edition
Stauffer, D.B; Hirschenhofer, J.H.; Klett, M.G.; Engleman, R.R. (1998)82
- ADVANCED COMPOSITE WIND TURBINE BLADE DESIGN BASED ON DURABILITY AND DAMAGE TOLERANCE
Galib Abumeri; Frank Abdi (PhD) (2012)78
Last updated on Thursday 07 July 2016