July 2013 Most Viewed Documents for Engineering

  1. Heat Treatment Procedure Qualification -- Final Technical Report
    Robert C. Voigt (2004)

    513

  2. Charpy impact test results on five materials and NIST verification specimens using instrumented 2-mm and 8-mm strikers
    Nanstad, R.K.; Sokolov, M.A. (1995)

    241

  3. Conduction heat transfer solutions
    VanSant, J.H. (1980)

    194

  4. Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review
    Doebling, S.W.; Farrar, C.R.; Prime, M.B.; Shevitz, D.W. (1996)

    122

  5. Heat transfer model of above and underground insulated piping systems
    Kwon, K.C. (1998)

    116

  6. Stress analysis and evaluation of a rectangular pressure vessel. [For equipment for sampling Hanford tank radwaste]
    Rezvani, M.A.; Ziada, H.H. (Westinghouse Hanford Co., Richland, WA (United States)); Shurrab, M.S. (Westinghouse Savannah River Co., Aiken, SC (United States)) (1992)

    109

  7. An efficient method for calculating RMS von Mises stress in a random vibration environment
    Segalman, D.J.; Fulcher, C.W.G.; Reese, G.M.; Field, R.V. Jr. [Sandia National Labs., Albuquerque, NM (United States). Structural Dynamics and Vibration Control Dept.] (1998)

    93

  8. Lunar Wireless Power Transfer Feasibility Study
    Sheldon Freid, et al. (2008)

    74

  9. Calibration interval technical basis document
    Chiaro, P.J. Jr. (1998)

    60

  10. GRAIN REFINEMENT OF PERMANENT MOLD CAST COPPER BASE ALLOYS
    M. SADAYAPPAN, J.P. THOMSON, M.ELBOUJDAINI, G. PING GU, M. SAHOO (2004)

    56

  11. SYNTHETIC SLING FAILURE - EVALUATIONS & RECOMMENDATIONS
    MACKEY TC; HENDERSON CS (2009)

    50

  12. Work Functions of the transition Metals and Metal Silicides
    Drummond, T.J. (1999)

    49

  13. Nature and measurements of torque ripple of permanent-magnet adjustable-speed motors
    Hsu, J.S.; Scoggins, B.P.; Scudiere, M.B.; Marlino, L.D.; Adams, D.J.; Pillay, P. (1995)

    44

  14. Surface recombination in semiconductors
    Langer, J.M. [Polish Academy of Sciences, Warsaw (Poland). Inst. of Physics]; Walukiewicz, W. [Lawrence Berkeley Lab., CA (United States)] (1995)

    41

  15. Laboratory instrument design progress report, January 1--April 30, 1949
    Olt, R.G. (1949)

    40

  16. IN SITU Ge(Li) AND NaI(Tl) GAMMA-RAY SPECTROMETRY.
    Beck, H.L.; DeCampo, J.; Gogolak, C. (1972)

    40

  17. Reynolds number dependence of the drag coefficient for laminar flow through fine-scale screens
    O'Hern, T.J.; Torczynski, J.R. (1991)

    39

  18. Pressure and flow characteristics of restrictive flow
    orifice devices.
    Shrouf, Roger D. (2003)

    38

  19. Fiber Optical Micro-detectors for Oxygen Sensing in Power Plants
    Gregory L. Baker; Ruby N. Ghosh; D.J. Osborn; Po Zhang (2006)

    37

  20. Failure Modes and Causes for Swing and Lift Type Check Valves.
    McElhaney, K.L. (1997)

    36

Last updated on Wednesday 22 June 2016