March 2015 Most Viewed Documents for Engineering

  1. Heat Treatment Procedure Qualification -- Final Technical Report
    Robert C. Voigt (2004)

    325

  2. Stress analysis and evaluation of a rectangular pressure vessel. [For equipment for sampling Hanford tank radwaste]
    Rezvani, M.A.; Ziada, H.H. (Westinghouse Hanford Co., Richland, WA (United States)); Shurrab, M.S. (Westinghouse Savannah River Co., Aiken, SC (United States)) (1992)

    223

  3. Conduction heat transfer solutions
    VanSant, J.H. (1980)

    214

  4. Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review
    Doebling, S.W.; Farrar, C.R.; Prime, M.B.; Shevitz, D.W. (1996)

    213

  5. Charpy impact test results on five materials and NIST verification specimens using instrumented 2-mm and 8-mm strikers
    Nanstad, R.K.; Sokolov, M.A. (1995)

    190

  6. Heat transfer model of above and underground insulated piping systems
    Kwon, K.C. (1998)

    169

  7. Optimization of Operating Parameters for Minimum Mechanical Specific Energy in Drilling
    Hamrick, Todd (2011)

    165

  8. Pressure and flow characteristics of restrictive flow orifice devices.
    Shrouf, Roger D. (2003)

    163

  9. An efficient method for calculating RMS von Mises stress in a random vibration environment
    Segalman, D.J.; Fulcher, C.W.G.; Reese, G.M.; Field, R.V. Jr. [Sandia National Labs., Albuquerque, NM (United States). Structural Dynamics and Vibration Control Dept.] (1998)

    107

  10. GRAIN REFINEMENT OF PERMANENT MOLD CAST COPPER BASE ALLOYS
    M. SADAYAPPAN, J.P. THOMSON, M.ELBOUJDAINI, G. PING GU, M. SAHOO (2004)

    105

  11. Work Functions of the transition Metals and Metal Silicides
    Drummond, T.J. (1999)

    95

  12. Calibration interval technical basis document
    Chiaro, P.J. Jr. (1998)

    93

  13. Radar cross section of triangular trihedral reflector with extended bottom plate.
    Brock, Billy C.; Doerry, Armin Walter (2009)

    93

  14. Laser beam shaping techniques
    DICKEY,FRED M.; WEICHMAN,LOUIS S.; SHAGAM,RICHARD N. (2000)

    87

  15. Surface recombination in semiconductors
    Langer, J.M. [Polish Academy of Sciences, Warsaw (Poland). Inst. of Physics]; Walukiewicz, W. [Lawrence Berkeley Lab., CA (United States)] (1995)

    72

  16. Failure Modes and Causes for Swing and Lift Type Check Valves.
    McElhaney, K.L. (1997)

    69

  17. HYDRODYNAMIC ASPECTS OF BOILING HEAT TRANSFER (thesis)
    Zuber, N. (1959)

    69

  18. Nature and measurements of torque ripple of permanent-magnet adjustable-speed motors
    Hsu, J.S.; Scoggins, B.P.; Scudiere, M.B.; Marlino, L.D.; Adams, D.J.; Pillay, P. (1995)

    60

  19. Compact heat exchangers for condensation applications: Yesterday, today and tomorrow
    Panchal, C.B. (1993)

    56

  20. Standard NIM instrumentation system
    Not Available (1990)

    53

Last updated on Wednesday 15 June 2016