June 2015 Most Viewed Documents for Engineering

  1. Heat Treatment Procedure Qualification -- Final Technical Report
    Robert C. Voigt (2004)

    431

  2. Optimization of Operating Parameters for Minimum Mechanical Specific Energy in Drilling
    Hamrick, Todd (2011)

    292

  3. Conduction heat transfer solutions
    VanSant, J.H. (1980)

    288

  4. Charpy impact test results on five materials and NIST verification specimens using instrumented 2-mm and 8-mm strikers
    Nanstad, R.K.; Sokolov, M.A. (1995)

    247

  5. Stress analysis and evaluation of a rectangular pressure vessel. [For equipment for sampling Hanford tank radwaste]
    Rezvani, M.A.; Ziada, H.H. (Westinghouse Hanford Co., Richland, WA (United States)); Shurrab, M.S. (Westinghouse Savannah River Co., Aiken, SC (United States)) (1992)

    245

  6. Pressure and flow characteristics of restrictive flow orifice devices.
    Shrouf, Roger D. (2003)

    224

  7. Heat transfer model of above and underground insulated piping systems
    Kwon, K.C. (1998)

    206

  8. Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review
    Doebling, S.W.; Farrar, C.R.; Prime, M.B.; Shevitz, D.W. (1996)

    151

  9. Failure Modes and Causes for Swing and Lift Type Check Valves.
    McElhaney, K.L. (1997)

    128

  10. Laser beam shaping techniques
    DICKEY,FRED M.; WEICHMAN,LOUIS S.; SHAGAM,RICHARD N. (2000)

    128

  11. Work Functions of the transition Metals and Metal Silicides
    Drummond, T.J. (1999)

    119

  12. Calibration interval technical basis document
    Chiaro, P.J. Jr. (1998)

    104

  13. GRAIN REFINEMENT OF PERMANENT MOLD CAST COPPER BASE ALLOYS
    M. SADAYAPPAN, J.P. THOMSON, M.ELBOUJDAINI, G. PING GU, M. SAHOO (2004)

    90

  14. Standard NIM instrumentation system
    Not Available (1990)

    75

  15. SYNTHETIC SLING FAILURE - EVALUATIONS & RECOMMENDATIONS
    MACKEY TC; HENDERSON CS (2009)

    72

  16. The Electrical Properties of Native and Deposited Thin Aluminum Oxide Layers on Aluminum: Hydration Effects
    Barbour, J.C.; Copeland, R.G.; Dunn, R.G.; Missert, N.; Montes, L.P.; Son, K.-A.; Sullivan, J.P. (1998)

    70

  17. U235: a gamma ray analysis code for uranium isotopic determination
    Clark, D. (1997)

    70

  18. Nature and measurements of torque ripple of permanent-magnet adjustable-speed motors
    Hsu, J.S.; Scoggins, B.P.; Scudiere, M.B.; Marlino, L.D.; Adams, D.J.; Pillay, P. (1995)

    65

  19. Surface recombination in semiconductors
    Langer, J.M. [Polish Academy of Sciences, Warsaw (Poland). Inst. of Physics]; Walukiewicz, W. [Lawrence Berkeley Lab., CA (United States)] (1995)

    63

  20. HYDRODYNAMIC ASPECTS OF BOILING HEAT TRANSFER (thesis)
    Zuber, N. (1959)

    59

Last updated on Tuesday 14 June 2016