July 2013 Most Viewed Documents for Materials

  1. Heat Treatment Procedure Qualification -- Final Technical Report
    Robert C. Voigt (2004)

    513

  2. Fatigue design curves for 6061-T6 aluminum
    Yahr, G.T. (1993)

    346

  3. Charpy impact test results on five materials and NIST verification specimens using instrumented 2-mm and 8-mm strikers
    Nanstad, R.K.; Sokolov, M.A. (1995)

    241

  4. Enhancing thermal conductivity of fluids with nanoparticles
    Choi, S.U.S.; Eastman, J.A. (1995)

    199

  5. The influence of grain size on the mechanical properties ofsteel
    Morris Jr., J.W. (2001)

    179

  6. Graphite design handbook
    Ho, F.H. (1988)

    136

  7. Mechanical properties and energy absorption characteristics of a polyurethane foam
    Goods, S.H.; Neuschwanger, C.L.; Henderson, C.; Skala, D.M. (1997)

    131

  8. Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review
    Doebling, S.W.; Farrar, C.R.; Prime, M.B.; Shevitz, D.W. (1996)

    122

  9. Lithium literature review: lithium's properties and interactions
    Jeppson, D.W.; Ballif, J.L.; Yuan, W.W.; Chou, B.E. (1978)

    93

  10. Metals design handbook
    Betts, W.S. (1988)

    89

  11. A study of polyether-polyol- and polyester-polyol-based rigid urethane foam systems
    Madden, J.P.; Baker, G.K.; Smith, C.H. (1971)

    86

  12. PROPERTIES AND PERFORMANCE OF CEMENT-BASED GROUTS FOR GEOTHERMAL HEAT PUMP APPLICATIONS.
    ALLAN,M.L. (1999)

    80

  13. P-type doping of GaN
    Wong, R.K. (2000)

    75

  14. Verification of Allowable Stresses In ASME Section III Subsection NH For Grade 91 Steel & Alloy 800H
    R. W. Swindeman; M. J. Swindeman; B. W. Roberts; B. E. Thurgood; D. L. Marriott (2007)

    67

  15. Controlled low strength materials (CLSM), reported by ACI Committee 229
    Rajendran, N. (1997)

    65

  16. Final Report, Volume 1, Metallurgical Evaluation of Cast Duplex Stainless Steels and their Weldments
    Wen, Songqing; Lundin, Carl, W.; Batten, Greg, W. (2005)

    65

  17. GRAIN REFINEMENT OF PERMANENT MOLD CAST COPPER BASE ALLOYS
    M. SADAYAPPAN, J.P. THOMSON, M.ELBOUJDAINI, G. PING GU, M. SAHOO (2004)

    56

  18. Comparison of three Ni-Hard I alloys
    Dogan, Omer N.; Hawk, Jeffrey A.; Rice, J. (Texaloy Foundry Co., Inc., Floresville, Texas) (2004)

    56

  19. Overcoming residual stresses and machining distortion in the production of aluminum alloy satellite boxes.
    Younger, Mandy S.; Eckelmeyer, Kenneth Hall (2007)

    54

  20. Work Functions of the transition Metals and Metal Silicides
    Drummond, T.J. (1999)

    49

Last updated on Wednesday 22 June 2016