September 2013 Most Viewed Documents for Materials

  1. The influence of grain size on the mechanical properties ofsteel
    Morris Jr., J.W. (2001)

    119

  2. Charpy impact test results on five materials and NIST verification specimens using instrumented 2-mm and 8-mm strikers
    Nanstad, R.K.; Sokolov, M.A. (1995)

    117

  3. Mechanical properties and energy absorption characteristics of a polyurethane foam
    Goods, S.H.; Neuschwanger, C.L.; Henderson, C.; Skala, D.M. (1997)

    87

  4. Fatigue design curves for 6061-T6 aluminum
    Yahr, G.T. (1993)

    87

  5. Graphite design handbook
    Ho, F.H. (1988)

    76

  6. Enhancing thermal conductivity of fluids with nanoparticles
    Choi, S.U.S.; Eastman, J.A. (1995)

    74

  7. PROPERTIES AND PERFORMANCE OF CEMENT-BASED GROUTS FOR GEOTHERMAL HEAT PUMP APPLICATIONS.
    ALLAN,M.L. (1999)

    70

  8. Verification of Allowable Stresses In ASME Section III Subsection NH For Grade 91 Steel & Alloy 800H
    R. W. Swindeman; M. J. Swindeman; B. W. Roberts; B. E. Thurgood; D. L. Marriott (2007)

    57

  9. Results of charpy V-notch impact testing of structural steel specimens irradiated at {approximately}30{degrees}C to 1 x 10{sup 16} neutrons/cm{sup 2} in a commercial reactor cavity
    Iskander, S.K.; Stoller, R.E. (1997)

    54

  10. Surface recombination in semiconductors
    Langer, J.M. [Polish Academy of Sciences, Warsaw (Poland). Inst. of Physics]; Walukiewicz, W. [Lawrence Berkeley Lab., CA (United States)] (1995)

    51

  11. Final Report, Volume 1, Metallurgical Evaluation of Cast Duplex Stainless Steels and their Weldments
    Wen, Songqing; Lundin, Carl, W.; Batten, Greg, W. (2005)

    51

  12. P-type doping of GaN
    Wong, R.K. (2000)

    49

  13. Metals design handbook
    Betts, W.S. (1988)

    37

  14. Comparison of three Ni-Hard I alloys
    Dogan, Omer N.; Hawk, Jeffrey A.; Rice, J. (Texaloy Foundry Co., Inc., Floresville, Texas) (2004)

    37

  15. A Weibull brittle material failure model for the ABAQUS computer program
    Bennett, J. (1991)

    36

  16. Controlled low strength materials (CLSM), reported by ACI Committee 229
    Rajendran, N. (1997)

    35

  17. GRAIN REFINEMENT OF PERMANENT MOLD CAST COPPER BASE ALLOYS
    M. SADAYAPPAN, J.P. THOMSON, M.ELBOUJDAINI, G. PING GU, M. SAHOO (2004)

    35

  18. Energy level structure and transition probabilities in the spectra of the trivalent lanthanides in LaF/sub 3/. [Tables, diagrams]
    Carnall, W.T.; Crosswhite, H.; Crosswhite, H.M. (1978)

    34

  19. Work Functions of the transition Metals and Metal Silicides
    Drummond, T.J. (1999)

    32

  20. A study of polyether-polyol- and polyester-polyol-based rigid urethane foam systems
    Madden, J.P.; Baker, G.K.; Smith, C.H. (1971)

    32

Last updated on Wednesday 22 June 2016