June 2015 Most Viewed Documents for Materials

  1. Fatigue design curves for 6061-T6 aluminum
    Yahr, G.T. (1993)

    531

  2. The influence of grain size on the mechanical properties ofsteel
    Morris Jr., J.W. (2001)

    444

  3. Heat Treatment Procedure Qualification -- Final Technical Report
    Robert C. Voigt (2004)

    431

  4. Mechanical properties and energy absorption characteristics of a polyurethane foam
    Goods, S.H.; Neuschwanger, C.L.; Henderson, C.; Skala, D.M. (1997)

    270

  5. Charpy impact test results on five materials and NIST verification specimens using instrumented 2-mm and 8-mm strikers
    Nanstad, R.K.; Sokolov, M.A. (1995)

    247

  6. Enhancing thermal conductivity of fluids with nanoparticles
    Choi, S.U.S.; Eastman, J.A. (1995)

    191

  7. Verification of Allowable Stresses In ASME Section III Subsection NH For Grade 91 Steel & Alloy 800H
    R. W. Swindeman; M. J. Swindeman; B. W. Roberts; B. E. Thurgood; D. L. Marriott (2007)

    181

  8. Corrosion Testing of Carbon Steel in Acid Cleaning Solutions
    Wiersma, B.J. (2002)

    180

  9. Ferrite Measurement in Austenitic and Duplex Stainless Steel Castings - Literature Review
    Lundin, C.D.; Zhou, G.; Ruprecht, W. (1999)

    172

  10. Comparison of three Ni-Hard I alloys
    Dogan, Omer N.; Hawk, Jeffrey A.; Rice, J. (Texaloy Foundry Co., Inc., Floresville, Texas) (2004)

    166

  11. Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: A literature review
    Doebling, S.W.; Farrar, C.R.; Prime, M.B.; Shevitz, D.W. (1996)

    151

  12. A study of polyether-polyol- and polyester-polyol-based rigid urethane foam systems
    Madden, J.P.; Baker, G.K.; Smith, C.H. (1971)

    148

  13. Overcoming residual stresses and machining distortion in the production of aluminum alloy satellite boxes.
    Younger, Mandy S.; Eckelmeyer, Kenneth Hall (2007)

    147

  14. Work Functions of the transition Metals and Metal Silicides
    Drummond, T.J. (1999)

    119

  15. Final Report, Volume 1, Metallurgical Evaluation of Cast Duplex Stainless Steels and their Weldments
    Wen, Songqing; Lundin, Carl, W.; Batten, Greg, W. (2005)

    114

  16. PROPERTIES AND PERFORMANCE OF CEMENT-BASED GROUTS FOR GEOTHERMAL HEAT PUMP APPLICATIONS.
    ALLAN,M.L. (1999)

    102

  17. Yield improvement and defect reduction in steel casting
    Kent Carlson (2004)

    100

  18. Results of charpy V-notch impact testing of structural steel specimens irradiated at {approximately}30{degrees}C to 1 x 10{sup 16} neutrons/cm{sup 2} in a commercial reactor cavity
    Iskander, S.K.; Stoller, R.E. (1997)

    98

  19. GRAIN REFINEMENT OF PERMANENT MOLD CAST COPPER BASE ALLOYS
    M. SADAYAPPAN, J.P. THOMSON, M.ELBOUJDAINI, G. PING GU, M. SAHOO (2004)

    90

  20. Energy level structure and transition probabilities in the spectra of the trivalent lanthanides in LaF/sub 3/. [Tables, diagrams]
    Carnall, W.T.; Crosswhite, H.; Crosswhite, H.M. (1978)

    89

Last updated on Tuesday 14 June 2016