December 2015 Most Viewed Documents for Power Generation And Distribution

  1. Electric power high-voltage transmission lines: Design options, cost, and electric and magnetic field levels
    Stoffel, J.B.; Pentecost, E.D.; Roman, R.D.; Traczyk, P.A. (1994)

    740

  2. Load flow analysis: Base cases, data, diagrams, and results
    Portante, E.C.; Kavicky, J.A.; VanKuiken, J.C.; Peerenboom, J.P. (1997)

    224

  3. Wet cooling towers: rule-of-thumb design and simulation
    Leeper, S.A. (1981)

    187

  4. ASPEN Plus Simulation of CO2 Recovery Process
    Charles W. White III (2003)

    176

  5. Electric power substation capital costs
    Dagle, J.E.; Brown, D.R. (1997)

    135

  6. Recovery of Water from Boiler Flue Gas Using Condensing Heat Exchangers
    Levy, Edward; Bilirgen, Harun; DuPont, John (2011)

    116

  7. Feed-pump hydraulic performance and design improvement, Phase I: research program design. Final report
    Brown, W.H.; Gopalakrishnan, S.; Fehlau, R.; Thompson, W.E.; Wilson, D.G. (1982)

    108

  8. Multilevel converters -- A new breed of power converters
    Lai, J.S. [Oak Ridge National Lab., TN (United States). Engineering Technology Div.]; Peng, F.Z. [Univ. of Tennessee, Knoxville, TN (United States)]|[Oak Ridge National Lab., TN (United States)] (1995)

    105

  9. Load Modeling and State Estimation Methods for Power Distribution Systems: Final Report
    Tom McDermott (2010)

    94

  10. Seventh Edition Fuel Cell Handbook
    NETL (2004)

    91

  11. Structural considerations for solar installers : an approach for small, simplified solar installations or retrofits.
    Richards, Elizabeth H.; Schindel, Kay (City of Madison, WI); Bosiljevac, Tom; Dwyer, Stephen F.; Lindau, William (Lindau Companies, Inc., Hudson, WI); Harper, Alan (City of Madison, WI) (2011)

    72

  12. Wireless Sensor Network for Electric Transmission Line Monitoring
    Alphenaar, Bruce (2009)

    69

  13. Controlled low strength materials (CLSM), reported by ACI Committee 229
    Rajendran, N. (1997)

    64

  14. Application of Pulse Spark Discharges for Scale Prevention and Continuous Filtration Methods in Coal-Fired Power Plant
    Cho, Young; Fridman, Alexander (2012)

    64

  15. National SCADA Test Bed Substation Automation Evaluation Report
    Kenneth Barnes; Briam Johnson (2009)

    61

  16. Multilevel converters for power system applications
    Lai, J.S.; Stovall, J.P. [Oak Ridge National Lab., TN (United States)]; Peng, F.Z. [Univ. of Tennessee, Knoxville, TN (United States)]|[Oak Ridge National Lab., TN (United States)] (1995)

    56

  17. Electrical and mechanical design criteria for EHV and UHV: overhead transmission lines
    Not Available (1980)

    53

  18. Molten Salt-Carbon Nanotube Thermal Energy Storage for Concentrating Solar Power Systems Final Report
    Michael Schuller; Frank Little; Darren Malik; Matt Betts; Qian Shao; Jun Luo; Wan Zhong; Sandhya Shankar; Ashwin Padmanaban (2012)

    43

  19. Feed-pump hydraulic performance and design improvement, Phase I: research program design. Final report
    Brown, W.H.; Gopalakrishnan, S.; Fehlau, R.; Thompson, W.E.; Wilson, D.G. (1982)

    43

  20. Manufacture of ammonium sulfate fertilizer from FGD-gypsum. Technical report, September 1--November 30, 1994
    Chou, M.I.M.; Rostam-Abadi, M.; Lytle, J.M. [Illinois State Geological Survey, Champaign, IL (United States)]; Hoeft, R. [Illinois Univ., Urbana, IL (United States)]; Blevins, F.Z. [Allied-Signal, Inc., Morristown, NJ (United States)]; Achron, F. [Southeast Marketing Chemical Process, Inc. (United States)] (1994)

    40

Last updated on Tuesday 14 June 2016